Lab 1 - EE 421L
First, I logged
into MobaXterm. This allows me into Cadence where I uploaded
libraries and tried getting a feel for the functions of the program. This first
lab goes through the first part of tutorial 1 on the CMOSedu website. Using
the command ‘virtouso &’ to open up Cadence, I
constructed a simple schematic as seen in Figure 1. With quick key I, I found
the components needed for the figure below.
I then
simulated the schematic that exhibits a voltage divider yielding the results in
Figure 2.
I will be
saving my files on my desktop (Figure 3)…
As well as on
an external hard drive (Figure 4).