So
how do I use it?
First and foremost; you are using this software at your own risk, we do
not
take responsibility for any damages to your system, but we do not
believe it
can harm anyone anyway. Secondly, you must run DSEO with administrative
privileges (Right click and choose Run as administrator).
1. Download the application from the link below.
Right click on it and
choose "Run as administrator". Inside its main menu, press on the
“Enable Test Mode” button and follow the instructions on the screen.
This will
enable TESTSIGNING mode, which allows unverified system files to be
loaded.
2. Now all you have to do is to add the unverified
signature to the
required system files. To do so press on the “Sign a System File”
button from
the main menu, and enter specific filename including full path. For
example:
if ATITool64.sys from C:\Windows\System32\drivers refuses to load due
to driver
signature enforcement, you should type:
“C:\Windows\System32\drivers\ATITool64.sys”, and if you would like to
sign more
than a single file, just repeat this procedure until you’re done, and
finally
reboot.
After you enabled Test Mode and added signatures to the required system
files,
they should bypass Windows’s driver signature enforcement and load
without any
issues. However, if for some reason you are interested to revert it,
you can
re-launch the application, choose “Disable Test Mode” from the main
menu, and
reboot. If you encounter issues or having questions, feel free to post
it on
our forums.
Note: DSEO requires administrative privileges (Run
as administrator).