Lab 1 - EE 421L
This
lab focuses on how to draft lab reports for the website and following
the first part of Tutorial 1 on how to use Cadence. It also discusses
the method of backing up files for the lab class.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Figure 1: Result of using snipping tool
Table generated from KompoZer:
Figure 2: Example Table
----------------------------------------------------------------------------------------------------------------------------------------------------
LAB REPORT
Part 1: Image and Description of Tutorial 1
Before creating a schematic, a new library is created which is called Tutorial_1.
Figure 3: Library Manager
After creating a new library and a cell view called R_div, I drew out a resistor voltage divider circuit as instructed.
Figure 4: Voltage Divider Circuit Schematic
After checking and saving the schematic, I set up the transient analysis using the ADE L software with a stop time of 1 second. I also set wires "in" and "out" as output for the waveforms.
Figure 5: ADE L window
This is the waveform for the transient analysis:
Figure 6: Transient Analysis Waveform
Part 2: Backup Method
For backing up files from this lab class, I will use OneDrive primarily.
Figure 7: OneDrive directory for EE421L
Inside one of the lab folders:
Figure 8: Inside one of the lab folders
Also, Google Drive will serve as a secondary backup.
Figure 9: Google Drive