Lab 01 - EE 421L
After downloading the NCSU Cadence Design Kit and completing the initial setup of creating a working environment, I started Virtuoso.
Inside of the Tutorial_1 library, a new cell was created to create a new schematic.
Below is a picture of the completed schematic using two 10k resisters and a 1 DC voltage source.
Upon completing the schematic, Spectre was used to simulate the operation of the circuit.
A transient analysis was used, and the signals to plot were chosen.
Below is a picture of the simulation result.
2) How I will backup my labs
While I am editing the htm files locally, I will always have my files backed up onto my student drive.
After finishing the lab report, I will back up all the files to my Dropbox.
