Lab 1 - ECE 421L
Authored
by
Your Name, Vincent Ibanez, ibanez.troy.e@gmail.com
Today's
date 08/25/2014
Tutorial 1:
This image shows the voltage divider circuit that I built using Cadence Virtuoso. In this voltage divider, two 10k resitors are in series with the voltage source as seen below.
![Image2](9-2-2014%207-13-33%20PM.png)
A transient simulation was then performed measuring the values in both the nodes labeled "Out" and "In"
![Image3](9-2-2014%207-13-05%20PM.png)
This
image shows the results of the graphed transient analysis on the
voltage divider circuit. We can see a DC voltage of 1V measured at the
Input and .5V measured from the output.
![Image1](9-2-2014%207-11-52%20PM.png)
How will I regulate back-ups you ask??
The
lab folders are synced into Dropbox. Everytime a lab draft is
created, it is made locally, automatically syncing into Dropbox then
uploaded online.
![Image4](Untitled.png)
After the draft is finished, uploading to CMOSedu is just a simple drag and drop via FileZilla.
![Image 5](Untitled1.png)
Return to labs